BT-150D superhard tool grinder produced by Beijing Demingna Company can process and re-grind polycrystalline diamond (PCD), cubic boron nitride (CBN), cemented carbide and other superhard material blades and turning tools. It has high precision in design and manufacture and can grind blade edges and tooltip arcs with high precision and good quality.
Automation and Tool Grinding Efficiency
As long as the alignment is completed, the grinding is automatically completed by pressing the switch. The hardness of the diamond material (PCD) is high and the grinding wheel wears quickly. The system can automatically detect and compensate the wear and maintain the grinding dimensional accuracy for a long time. In addition, the machine tool is equipped with a positioning fixture, so it is not necessary to adjust the position of CCD camera when grinding cutters of different thickness, so as to improve work efficiency.
BT-150D tool grinder can form the ability of precision grinding and testing the following cutting tools
1. Precision end milling cutter, the form of tool end can be flat-end milling cutter; arc chamfering cutter; linear chamfering cutter; ball-end cutter.
2. Bits with standard drill point and plane rear angle, step drill and side-edge drill.
3. Hard taps, countersunk holes, flat bottom holes, and reamers.
4. Polycrystalline diamond (PCD), cubic boron nitride (PCBN), alloy blades and turning tools.
Requirements for operators
Operators are required to have experience in diamond tool grinding, preferably in the use of diamond tools. Meanwhile, operators are required to familiar with computer application software.
Expensive cutting tools are a large part of the production cost, so the re-grinding of cutting tools has become a problem that can not be ignored in the manufacturing industry. Choosing reasonable tool grinding equipment can not only meet the requirements of modern mechanical processing equipment and technology for tool but also save production costs.
